Baoding Tongli Electric Equipment Co., Ltd.

简体中文EnglishAdd to Favorite
Drop-out Fuse Cutout

PD1 Series Export 12~15 kV Drop-out Fuse Cutout

Views:

Description :
         Drop-out fuse cutout and load switching fuse cutout are of outdoor used high voltage protective device. To be connected with incoming feeder of distribution transformer or distribution lines it mainly protect transformer or lines from short circuit and overload, and on/ off loading current.Drop-out fuse cutout is conposed of insulat insulator supports and fuse tube ,static contacts is fixed on two sides of insulator support and moving contact is installed on two ends of fuse tube.Fuse tube is composed of inside arc-extinguishing tube ,outer phenolic compound paper tube or epoxy glass tube .Load switching fuse cutout provides enforced elastic auxiliary contacts and arc-extinguishing enclosure for switching on/off loading current.
  At normally working via fuselink tightened the fuse tube is fixed to form up of close position. In case system occur faults,fault current result in fuse melt immediately and take place electric arc,which let arc-extinguishing tube being heated and explode a lot of gas.This will produce high pressure and blow off the arc along with tube.After fuselink melt moving contact has no tightened strength again,mechanism is locked and fuse tube drop out.Cutout now is in open position.When it needs to switchn off during cutout loading,operator shall via insulating cperating bar pull the moving contact,at its beginning main contact and auxiliary static contact is contacted still.Whiling pulling the auxiliary contact is separated between auxiliary contacts there occur electric arc and the arc will be lengthened in arc-extinguishing enclosure gap and meanwhile arc-extinguishing explode gas to blow off the arc during current passing zero.

Main Technical Parameter :


久久亚洲无码精品综合